How you can earn diploma in engineering degree

If you are a student who was a Science wannabe but could not get admission to a good college? Or are you the kind who liked Math and Science, but could not get admission because of relatively lower grades in other subjects like social studies and languages?

PCP is the first choice of the students as it is one of the best polytechnic colleges in Pune

For those students, who have built up their minds about seeking the Science stream of education, and want to pursue engineering, a diploma course will be the first step towards that goal. Most of the state boards serve a diploma course in engineering. Also, diploma courses in architecture and pharmacy are common too.

To seek a diploma degree Pimpri Chinchwad Polytechnic is seen as one of the best Polytechnic College in Pune. PCP has created an appeal for the students who want to pursue a Diploma Course. Due to its consistent performance, PCP has become a notable institute in the educational sector over these years.

What is diploma course in engineering?

A diploma course in engineering includes:

The study of basic engineering concepts. It offers all the essential specializations, such as civil engineering, electronics engineering, electrical engineering, and IT and computer engineering, just like the degree courses. Students can then choose the subject that they are interested in. It is a known course, planned so that students can get a job in the engineering field once they get their diplomas.

Many students decide to pursue the course of diploma engineering as it allows them a direct ticket to the second year Bachelor of Engineering degree, that is why it is also known to be the ‘backdoor to engineering degree’. The student also gets one more advantage of bypassing the requirement to pass engineering entrance exams like the CET (Common Entrance Test).

The students may not have to pursue Class XI and Class XII exams. Rather than a ‘2 years (junior college) + 4 years (engineering degree course) = 6 years’ plan, the same qualification is gained in the same number of time with first a ‘3 years (diploma course) + 3 years (direct second year engineering course) = 6 years’.

How the diploma to degree course journey take place

10 percentage of the total seats of the second year of the Engineering degree course are saved for diploma students, depending upon the kind of diploma course they have pursued.

After the completion of the third year of a diploma course, a merit list of all students requesting admission to the second year of the engineering is prepared. Then a centralized method of admission takes place, wherein the student with the rank on the list is permitted to choose which degree college he would like to go for.

In other words, the topper of the list gets first preference to pick where he/ she wants to complete an engineering degree. If your rank is lower on the list, it is less likely that you will get entrance to the college of your preference; you will be dropped down with restricted options if you don’t perform well in your diploma exams.

The academic patterns are categorized into two types:

Yearly pattern: In a diploma course backing this pattern, the engineering board exams are carried only once a year. This course is of three year course and students of this course get a reservation of eight percent in the second year of an engineering degree course.

Semester pattern: In a diploma course backing this pattern, the board exams are carried twice a year. It is a course of four-year three years of education, and a one-year internship in industry. Students from this course get a two percent reservation for the second year of an engineering degree course.

Out of the reserved seats for both yearly and semester diploma, half are merit places, and the other half have to be paid. Thus for a yearly program of 100, out of the eight seats, four will be merit seats, and the other four will be paid for. For a semester pattern course of 100, on the other hand, out of two reserved seats, one will have to be paid.

Understanding difference between Computer and IT Engineering

You may have frequently heard that today is the world of IT and BT. You may have also experienced how the world has been transformed with the use of computers. Computers and softwares form the basis of every business today and have played a vital role in developing the industry. IT and software companies and of course their packages have attracted many students to this field. However, if you too are willing to pursue a course and be a part of today’s ever growing IT field, you may search for a number of best computer diploma engineering colleges in Pune. To name a few, they are Pimpri Chinchwad Polytechnic, D.Y. Patil Polytechnic, Siddhant College of Engineering, Navsahyadri Group of Institutes, etc. Among these and many all, and considering the past record, the most recommended college for best computer diploma engineering in Pune is found to be the Pimpri Chinchwad Polytechnic. The state-of-the art facilities and infrastructure of the college helps one to learn engineering with ease.

Once you finalize your college, you will encounter two trades in every engineering college, namely, Computer Engineering and Information Technology Engineering which seem roughly to be similar. One may find a overlap of the two trades and find oneself in dilemma. So, before you get confused only during the rush hours of admission, you ought to know and understand well the difference between the two.

Broadly speaking,computer engineering deals with hardware development while IT deals with running the production systems which are built by someone else. Computer science is involved in handling the technical working of computers while IT is all about information manipulation and the business requirements. Considering the academic syllabus, in IT, you will get to learn only software while in computer engineering; one can learn both software and hardware. Additionally, computer engineering includes in-depth study in computer system such as micro processors, networking, operating systems, etc. Thus, it is study of architecture of computer along with that of software.

Computer Engineering is purely about software and programming wherein one learns different programming languages, operating systems, database management, etc. On the other hand, in IT, one gets to learn mostly the networking part.

best computer diploma engineering in Pune
Computer Engineering

In computer engineering, basically, both electrical engineering & computer science courses get combined. One learns about electrical engineering, software design, and hardware software integration instead of just software engineering or electrical engineering. A computer engineering student gets to study the design of digital hardware and software systems including communications systems and computers. They are also involved in many aspects of computing that include the designing of individual microprocessors, personal computers, and supercomputers, and circuit design. Engineering in information technology deals with the study of designing, development, implementation, support or management of computer-based information systems, particularly software applications and computer hardware. It involves the use of electronic computers and computer software to convert, store, protect, process, transmit and securely retrieve information.

engineering college in Pune
IT Engineering

The computer engineers are involved in developing the softwares and related architectures and operating systems and there is no communication part while the IT engineers are involved in applying the developed softwares to solve problems and to develop something new. IT mostly includes the software side of computing, web designing and communication, programming languages, scripts, algorithms, etc. They store the information and everything related to do with it like the server architecture, the troubleshooting of the hardware, the security of the technology within the network and architecture and that everything which is required by the technology to keep it up and running to store the information.

For application of your knowledge, or say in the practical world, both branches have immense scope in computer field. IT engineer has an extra advantage that one can get a job of computer engineer. However, choice of any of the one trade depends on your interest in the related subfields. So, choose the best computer diploma engineering college in Pune and kick start your engineering career.

How a Diploma in Engineering can acquire you a degree?

Is it accurate to say that, you are one of those students who was a Science applicant, however couldn’t pick up admission to a decent college? Or, then again would you say you are the kind who aced Math and Science, yet missed out on overall percentage on account of nearly lower grades in different subjects like languages and Social Studies?

For such students, who have made up their minds to take Science stream of education and further keen on taking up engineering, a diploma course is the initial move towards it. A large portion of the state technical boards offer a diploma courses in engineering; diploma courses in design and pharmacy are well known as well.

Best polytechnic college in pune

What a diploma course in engineering involves

A diploma course in engineering includes:

  • The learning of essential engineering ideas.
  • It offers all the fundamental specializations, for example, electrical engineering, computer engineering, Automobile engineering, civil engineering, mechanical engineering, electronics engineering, and IT engineering, much the same as a degree course does. Students can then pick the course that interests them.
  • It is an expert course, planned with the goal that students can take up a job in the various engineering fields once they acquire their diplomas.

Various students select themselves in a diploma engineering course simply because it permits them an exchange to the second year Bachelor of Engineering degree course, which is the reason it is additionally referred to as the ‘secondary passage to degree engineering’.

Essentially, an exchange like that means:

  • The students might not need to take Class XI and Class XII exams. Rather than a ‘2 years (junior college) + 4 years (degree engineering) = 6 years’ approach, a similar qualification is accomplished in a similar measure of time with a ‘3 years (diploma engineering course) + 3 years (direct second year of engineering, 3 year degree engineering course) = 6 years’ approach.
  • The student additionally by-passes the need to pass engineering entrance tests like the Common Entrance Test (CET).

How the diploma to-degree course exchange happens

A specific percentage (10 percent) of the aggregate seats in the second year of the Bachelor of Engineering course are reserved for diploma students, depending on the sort of diploma course they have decided on.

Endless completion of the third year of a diploma course, a merit list of all understudies looking for admission to the second year of the degree course is prepared (based upon their performance in the third year diploma examinations).Then a centralized system of admission happens, wherein relying on your rank on the merit list, you are permitted to pick which degree college you might want to go to.

At the end of the day, the topper person in the list gets first preference to pick where he/she needs to pursue an engineering degree. The lower your rank on the merit list, the less likely it is that you will get access to your preferred college- you will be left with extremely limited choices if you don’t do well in your diploma exams.

polytechnic colleges in pune

Depending on the pattern of the engineering exams and the quantity of times they are conducted in an academic year, diploma engineering courses are of two sorts:

Yearly pattern: In a diploma course taking after this pattern, the engineering board exams are conducted just once a year. This is a three year course and students of such courses get an eight percent reservation in the second year of a degree course (a degree course with a limit of 100 students, for example, needs to reserve eight seats for these diploma students).

Semester pattern: In the diploma course following this pattern, the board exams are conducted twice every year. It is a four year course – three years of study, and one year of industrial training. Students from this course get a reservation of two percent in the second year of a degree course (a degree course with a limit of 100 students, for example, needs to reserve two seats for these diploma students).

An engineering diploma course can likewise be isolated into two types, depending on the basic qualification required:

  • Post SSC diploma course: Here, students with essential SSC qualification are acknowledged into the course.
  • Post HSC diploma course: Here, the base qualification for entrance is a HSC passing certificate.

Which is the best polytechnic college in pune that offers a Diploma course in engineering…?

For Fresh Class X students, Pimpri Chinchwad Polytechnic is one of the best Diploma Colleges in Pune.  Campus in PCP College is well equipped with advanced infrastructural facilities, open lawn, Sports facilities, and they offer best library facility for boys & girls. For young dynamic understudies, PCP is one of the Top polytechnic colleges in Pune. To know about Pimpri Chinchwad Polytechnic College and to obtain a list of courses they are offering, log onto the website .By providing quality system based teaching and learning processes this college is among the best Polytechnic College in Pune.

Automobile engineers

Who This Career is for?

A career as an automobile engineer is mainly for people who are driven and passionate about cars and bikes. They must have considerable understanding most vital skills which are required for this career path. Automobile engineers must be organized individuals who are willing to work in a methodical manner.

People in this career are required to communicate with many other professionals on a regular basis, both from within the field and outside it. And hence, this career is only for those with fluent communication skills. While automobile engineers must be eager workers, innovative they must not get carried away.

Automobile diploma engineering college

Want to know more about it?

Automobile engineers also hold a wide variety of responsibilities. Their basic purpose is to maximize the feasibility and design of automobiles keeping costs to an absolute minimum.

A typical professional in automobile field spends a lot of time on researching and designing both machines and systems for automobiles. The designs are initially done in the form of blueprints and drawings. Automobile engineers then apply mathematical and physical principles to these plans to make sure they are viable.

This planning is done after considerable research, and then it is altered again after linking the plans to the available research.

Once the planning process is completed, the designing process begins. Automobile engineers are responsible for transforming their research and plans into a viable end product. They must oversee the whole process of manufacturing, with meticulous attention to detail.

After the end product is completely manufactured, the most important part of an automobile engineer’s job begins. Testing is a rigorous process that must be done with maximum care. This procedure generally entails focusing on each and every component of an automobile to ensure that it is able to function in every imaginable condition in a most safe and secure manner.

Automobile engineers usually tend to specialize in a particular area. The most common areas of specialization include engines, structural designs and exhaust systems. No matter what an engineer decides to specialize in, she or he is almost always required to work on all three aspects of the automobile engineering research, process and designing as well as testing.

Automobile engineers usually know that they want to get into the field at a fairly young age, so they are generally people who studied mathematics and natural sciences in high school.

This gives them the edge to get a degree in engineering field, which is an essential prerequisite to become a perfect automobile engineer.

What are Salary Prospects?

A graduate engineer from top college of engineering gets a stipend of Rs. 28,000 to Rs. 30,000 a month during training. This can go up to Rs. 40,000 till he is confirmed. A line leader/assistant manager can even earn anything from Rs. 40,000 to Rs. 80,000 a month, depending on their experience in the industry.

According to PayScale India, an automobile engineer from best college of engineering can earn anywhere between Rs. 250,000 and Rs. 600,000 per annum which includes average bonuses and commissions received on the job.

How is Life?

Automobile engineers work different hours per week depending on the amount of work they have assigned during a particular week. They may work anywhere between a 40 hour week and a 55 hour week, but may even be required to do overtime if there are some outstanding deadlines or emergencies.

Automobile engineers usually spend a lot of time in front of a computer on their desks. When they are not doing research in their office, they are at plants monitoring the manufacturing of the automobiles they planned and their testing. This may involve spending lengthy periods of time in noisy factory environments.

Make Your Graduation Base Here

Being from technical background I strongly feel that only a theoretical knowledge is not enough. Technical background people must comprise of strong practical knowledge. Polytechnic college provides not only the good practical knowledge but also the great professionalism.

Polytechnic colleges in Pune have different streams such as Mechanical Engineering, Civil Engineering, IT, Automobile, Electronics and telecommunication and Computer Engineering. Students in this college get opportunity to explore their not only educational background but the extracurricular activities. It is necessary that students should get chance to experience every new thing. It is said that, “human learns from his experiences it doesn’t matter the experience is good or bad.” Today in India Automobile industry is making their place stronger. Prime minister’s initiative of “Make in India” is the main reason behind the each progress in automobile section. Very recently Bajaj Unveiled a new bike made from the scrap metal of INS Vikrant. Big companies like Tata Motors, Ashok Leyland, Hero Motocorp., Maruti Suzuki, etc. are also making their mark worldwide.

Mechanical Engineering will remain the core branch of all. It is obvious that before everything we need strong structure, particular method and the process analysis here Mechanical engineer plays an important role. As the mechanical engineering is the root for all it is the toughest branch of all. Mechanical Engineer plays an important role in the industry like Ferroalloy, Power plant etc. So mechanical engineer should comprise of strong practical approach towards each process. As an institute we always look over the progress of student.

As far as today’s concern networking and communication industry has demand of lot of electronics and telecommunication engineer in the market. The world is coming closer and becoming more digital. IT industry is always a boon for engineer in terms of getting job. We have well maintained computer labs.

Pimpri chinchwad polytechnic is best diploma college for computer science. Our experienced faculty provides cutting edge education to their students
PCP-Computer Lab

The reader can bring the revolution in the society is what we believe. We have huge collection of 18188 volumes, 29 International Titles. We also have collection of magazines like Auto Car, Overdrive M Ii, Better Interiors M Ii New, Digit, Indian Jnl of Multimedia Hy Ii, and Electronics for You, Readers Deigest, India Today.

The mission of institute is very clear; our mission is to train students in technology and engineering. We believe that each individual identify themselves as the good person and responsible. It is our institute responsibility to prepare them for successful employment, self-enterprise, higher education with the provision of good teaching and training. Students are future of tomorrow, so it is our responsibility to nurture it now, so that we can proudly say that this in our generation and we are proud of them. As we train students for the further education or employment, we believe that only technical skills never help to survive in the industrial environment it needs more of it. As an institute we always take care of students soft skills. We have best faculty to train our students. We believe that the teacher give shape to the future of students. So if you want to pursue further education then it is right place to take your first step.

Explore the Wide Opportunities for Best Career

The first war of  life is class 10th boards exams. We also can say that 10th class is first ladder of a student’s carrier.  Before one decide what to do after 10th STD, it is important that one should become aware of a critical factor for success in their chosen profession.  What’s next?  Whenever one reaches to an important milestone in their life, many students find this question intimidating if they are not clear about their career ambitions or how to reach it. With the end of school life, begins a life where one have to start taking some important decisions. It is important to have a clear career plan for a smooth passage from one’s school life to a happy professional life. If one doesn’t have an in-depth knowledge of the choices that one have ahead of them, one might end-up in a career that is not made for them. It is common among students going through this transition phase to get influenced by misinformation and end up making wrong decisions. After 10th the story changes, for the first time, they have the steering wheel of their career. For most of the students, this phase appears like a complex maze with lots of doors leading to different direction, and it becomes difficult to find the door that leads towards the student’s dream career.

best polytechnic colleges in pune

Which side to choose after 10th?? This is the critical decision that comes in every student who is going to pass his matriculation. There are various carrier paths after 10th  in polytechnic. One can complete his/her 11 and 12th education and then can go for graduation. Diploma is the specialized field and technical study which is to be done after 10th. 10th is mandatory to do the diploma. One must have completed their 10th with more than 50% marks under some recognized university or board. There are various top polytechnic colleges in Pune. One of the best polytechnic colleges in Pune is Pimpri Chinchwad Polytechnic.

Students who want to get admission in technical courses should take admission in polytechnic diploma. It is a 3 year course. There are many courses in Diploma (Engineering) stream just like Engineering in under graduation level. In diploma, there will have all the subjects covered from the Engineering stream of a specific field. One can get into the second year of the Engineering stream after completing their diploma but only private colleges allow undertaking the course from 2nd year. Both degree and diploma are recognition conferred to a person on the successful completion of an educational course.

The Importance of Soft Skills Development in Polytechnic students

A generation ago, classic picture of working engineer would have been like a person planning or tinkering with his tools all by himself.  At that time engineering was typically examined as isolated degree learnt to fulfill all or only technical skills. The scope of engineering has widened, due to the progress and improvement in technology and communication. Modern Engineering often works under traditional engineering system. MNC in engineering domain have abrupt change, and as a result this has made cross-culture association an essential part of day to day work. Modern engineering is a specialist that is dedicated to the design, development and improvement of various concepts of engineering and technology. Modern engineering technology deals with practical knowledge rather than theoretical one. In such an environment, today’s Engineer undoubtedly needs soft-skills (to handle interpersonal relationships) apart from his core expertise (technical skills) for survival at work.

In academic and career world, having a strong background in “hard” skills will be helpful but the number of employers will only improve along with “soft” skills. Soft skills include the ability to adapt to changing circumstances and the willingness to learn through experience, and are applicable across multiple disciplines and careers. It is important for students of polytechnic college to develop soft skills as they prepare themselves for college and enter the work arena. According to research, 9 out of 10 employers believe that Soft-skills will become increasingly important as globalization speeds.

Soft Skill Development in Polytechnic Colleges
                                                                          Soft Skill Development

Let us drill down on each of the 4 essential soft-skills required for an engineer:

  1. Communication Skills

Communication ultimately means “Good Listening”. If you attentively listen to others, you can show that you really care about others. . Listening allows your mind to clearly understand the need of another person, so that you can follow-up with appropriate action.

Having a good communication skill makes one deliver ideas clearly, effectively and with confidence which helps to communicate with various individuals from different cultural backgrounds. As a result you can follow-up with appropriate action.

  1. Self Confidence

Believing in yourself and all your personal skills can help you work with people better. To do a difficult or a new task and generally achieve all the things, you need to be a master of soft skills. It means self-assurance, self- belief in one’s personal judgment, ability, power, etc. Confidence makes your mind creative. The more confident you become, the clearer you think and the easier you conceive ideas. As a result you can follow-up with appropriate action. That automatically reflects in the clarity of your communication and finesse of your work

  1. Collaboration

It is imperative for best polytechnic college bound students to function efficiently and appropriately in groups, collaborate on projects and accept constructive criticism when working with others. People who prefer working alone likely struggles in college and beyond,  as the majority of careers require collaboration.

  1. Leadership Skills

While it is important to be able to function in a group, it is also important to demonstrate leadership skills when necessary. Both in college and within the workforce, the ability to assume the lead when the situation calls for it is a necessity for anyone who hopes to draw upon their knowledge and “hard” skills in a position of influence.

PCPolytechnic is one of the best diploma engineering colleges in Pune. PCPolytechnic College is always enthusiastic to achieve excellent standard of quality education with rapidly changing technologies and create technical manpower of global standards with capabilities of accepting new challenges.

Bridges, Roads or Buildings….It’s all about Civil Engineering.

Outlining and design of all Civil Engineering projects such as bridges, construction of highways, dam, tunnels etc are based upon surveying.

Furthermore, during acquisition, project of any measure is organized along the lines and points acknowledged by surveying.

Thus, surveying is a primitive requirement for all Civil Engineering projects.

Other principals which are applied while surveying:

  • To prepare a proper analytical data and scheduling it.
  • To rectify the national and state horizon
  • To graph navigable streams, coastlines and lakes;
  • To develop control points;
  • To implement oceanographic and hydrographic marking and mapping; and
  • To make topographic map of land surface of the earth.

Many people do not actualize the significance of civil engineers within the society. By implementing the infrastructure for our society, the civil engineers are ultimately giving anatomy to the history of our nations. One might question how this might be possible. By developing the society, civil engineers are essentially constructing the backbone for the world to ease on. Civil engineering has played a very vital role in boosting the quality of life in the last 50 years

By developing municipal sewer systems, better water supplies, wastewater treatment plants to the design of buildings to protect us from natural exposures and facilitate health care, to better agriculture through water resource development.

In our country we are precisely observing a vast growth in the development of structures. This offers building of new structures in addition to the renovation of the already existing ones.

Diploma in Civil engineering in pune
Diploma in Civil engineering in pune

Elements of Civil Engineering

Many do not realize the significance of civil engineers within the society. By enhancing the infrastructure for our society, they are giving a new shape to the history of our nations. Only by analyzing to the core about the duties of the civil engineers one can understand the significance of their job and their enormous responsibilities towards the society and the developing technologies.

Specialization in Civil Engineering:

The platform of the civil engineering program includes the study of the principle science in engineering. However this, it is organized to launch candidates into the many different kinds of problems that civil engineers have to face every day in their struggling study period.

Civil Engineering in India

Aspirants of civil engineering are forming new developing techniques to make the livelihood of people more soothing. The civil engineers do this by implementing and constructing comfortable houses, and by redesigning them as per the requirements of their clients. This results in the enhancement of our nation and in turn, the world.

Because of the different career benefits available, fresher does will get the chance to try out creative ideas. The many contributions of civil engineers could be seen in many of the well repudiated structures within our country and abroad. Aspirants of civil Engineering are recruited with all leading construction companies for several projects that are conducted by the State or Central Governments. These leading construction companies carry out recruitment on an annually basis for hiring an aspirant into many sectors.

For the upcoming new generation and youths who are confused between choosing the right field which their interested in to they can easily select the best and top polytechnic college in Pune. As Pune is known as a educational hub students can easily find and take admissions in their field from Best recruitment diploma college in pune

The Analysis of Five Trends in Colleges And Universities

 As 2016 winds to a close, along with the extensive higher education innovation and controversy that came with it, we look ahead to 2017 and what college and university directors should expect from the government regulation. The splitting of competency-based education development that was seen in 2015 is going to reach out to many new teaching techniques and colleges in 2017.

Administrators will find innovative ways to use foreshadowing analytics to improve student outcomes. Financial strain in the industry, despite the fact down overall, is expected to result in a rise in the number of closures and mergers.

Check the following for the further analysis on how these five trends will impact colleges and universities in the coming year.


Analysis of Five Trends

  1. Faculty-based Education

Very small number of direct appraisals competency-based degree programs are been operating with the dedication of the Education Department. Many of the institutions are looking forward for how they can organize competency based, self-paced education into their contribution, 2017 is sure to bring more advanced technologies in this educational field .

The regulatory landscape may be motivating some schools and colleges to slow their potency. But many of the colleges are all set to check ahead.

  1. Foreshadowing Analytics

Capital is extensive than ever for universities and colleges to prove that they can help their students accomplish their path to success. Most of the data, is used by analysts on higher education and correctional institutions. It is now also being used by administrators to expand the advancement of foreshadowing tools that allow staff and faculty to desire students mediation.

A number of campuses, including PC Polytechnic College, have early warning systems that alert students when they are at risk of poor outcomes. PC Polytechnic College is improving with the new foreshadowing software tools and taking the perception even further, by using massive data to keep records of the staff and faculty achievements.

The Analytics Standard is assertive to broaden access to data, and in obtainable formats, for universities and colleges that use third-party tools. Third party tools here actually means for the involvement, intervention and concentration with or for the student. As many of the vendors promise to the standards, the phase will be set for higher education institutions to work more with the data, ultimately, improve services for students and boost graduation and retention rates.

  1. Outcomes and Affiliates

Colleges may finish up 2016 analyzing their preferences, whether it be merging with a correspondent institution or coming up into some type of partnership that cuts down on costs or raises the profile of the colleges to help them for a better challenge.

This year saw the outcomes of many Colleges, schools, and a number of private institutions by their profits.  Falling enrollment across higher progresses to be completed in the for-profit sector. However Nonprofit organizations were not kept out of all the closure declaration in 2015.

  1. Reform of Accreditation

 2015 have had being a tough year to the accreditors and 2016 is not likely to bring relief yet. The Higher Education Act is on the edge of the reformation. Accreditation reformation is a top highlight and on priority of Education Department.

Nontraditional degree and certificate program providers could see extended entry to financial aid rupees in 2016. One main concern among would-be formenter, however it is all about the authority the new regulation could take. The focus is on increasing monetary return on investment of higher education when it comes to audit the value. The most and main motive of higher education is to come to a level of concordance over the student learning outcomes, and to push a more comprehensive approach to higher education liability, the consequences of this initiative will be on full display in 2017.

  1. Competition from alternative programs

The landscape of higher education is changing as digital technology follows to offer aspiring students and more options when they scrutinize post-secondary opportunities. The number of students registering in coding boot camps is shining as officials on all sides. The Educational Quality Through Innovation Partnerships (EQUIP) program will give other providers a chance to contribute financial aid to all the students.

Four-year colleges, especially minor selective public institutions, may also see elevated competition from community colleges that welfare from Promise programs, which provides the students 2 years free studies.

There are many more colleges and universities coming up with new trends in teaching as the world is getting more digitalized. Students want to move and develop with the new trends and digitalization. There are many students reaching out for Pune as it is an educational hub. Students want to grow in their particular chosen streams, learn and make their career in the higher ranked fields so the colleges are trying the best to provide their students with all the high profile teachings with advanced skills, tools of education and quality training. PCP polytechnic is one of the best diploma engineering colleges in Pune, and is also rendering in best computer diploma engineering in Pune. Many of the colleges are providing the best education for the upcoming future of the welfare of our country development and also for the betterment and bright future of the students.

The era of e-learning

“Learning is more effective when it is an active rather than a passive process.”  —  Kurt Lewin (1890-1947)

e-learningHow e-learning originated is not known to the world. It is suggested that this very term originated during the 1980’s at the same as another delivery mode online learning. This is when the computer evolution happened and it completely changed the traditional way of looking at classroom learning. Aristotle said, “What we have to learn to do, we learn by doing,” and Einstein echoed, “The only source of knowledge is experience.” Confucius said, “I hear and I forget. I see and I remember. I do and I understand.”

What is e-learning? E-learning is a computer based educational tool  that enables you to learn anywhere and at any time. Internet plays an important role in e-learning today, although in the past CD-ROMs were used. With technology increasing at a rapid pace it has bridged the gap between online tools available for learning. E-learning lets  you share materials, conduct webinars and communicate with professors on a regular basis via message forums. E-learning provides students with the ability to add learning to their daily schedules, effectively allowing even the busiest person to further a career or gain more skills.

The greatest developments in education happened since the launch of the internet. Since people are familiar with the latest technologies it is easier for people to get accustomed to this  new age of learning. Message boards, social media and other online communication allows people to keep in touch and discuss course related matters making it a community. With the quick changes in technology, course material need to be updated and readily avaible for its learners. The more things change, the more they remain unchanged. Learning has always been humanity’s lattermost survival skill, just like humans survived during the ice age or learnt to rise after the downfall of the markets and the economy.

E –learning is growing at a rapid pace and analysts suggest that it will reach $107 Billion in 2015, with countries like India dominating this industry. Studies show the Internet has transformed the online learning sector in recent times with an elevation of educational academies, corporate houses as well as training centers sharing expert thoughts and  knowledge through online programs.

best polytechnic college in pune

A Coursera study that evaluated over 50,000 Indian students reported better outcomes in the country than the global average. The online courses have benefitted 90 % Indian students, a 3 % higher than the global average. The study done by Coursera and researchers at the Universities of Pennsylvania and Washington, was carried out on students who had completed a course on coursera that was for three months or more.

A new study by LoudCloud Systems on e-learning research and development firm estimated the e-learning market size in India will grow from $20 billion to $40 billion by 2017. The firm noted that the online education and learning will change drastically in the next three years because online education is not only attracting the student community in India, but a number of businesses across different industries including IT, BSFI and manufacturing. Bajaj Financial Services, TVS Infotech and KPIT Cummins are some of the businesses that have adapted to the trends of e-learning.

The future of e- learning is enticing. S2S teaching platforms (2020 A.D.)  states  that students learn better and retain more when they actively interact with each other. It plays on the concept of mixed age and ability classrooms and makes use of individual learning to associate different students with peers who they can mentor or teach. Algo-generated lessons (2030 A.D.) is a natural outcome of the push for big data and data mining.Apart from those, new tools such as attention and eye  tracking will be used  where the student’s input can be monitored and quantified.Hence, lessons can be created that match the student’s targeted learning levels, prior knowledge, and preferred methods of learning. Neuro-informatics (2040 A.D.) Though the current state of the field is far removed from the 2040 applications projected, neuro-informatics will allow an understanding of how the human brain functions and how optimization of learning can be done by taking into consideration the individual’s brain structure. It is possible that Matrix-like technology will be developed that will allow information to be uploaded to the human brain without the need for any system of education.

Today e-learning is perceived as a low cost effective training method. The future of e- learning uses internet technologies like virtual classrooms and self paced instructions by using different applications such as user generated content, digital collaboration and web learning. With the rapid changes in technology and devices there is no doubt that e- learning is the ultimate of the e-world we are submerged in.